Vehicle Exhaust Ceramic Metal Catalyst 600cpsi

Vehicle Exhaust Ceramic Metal Catalyst 600cpsi

Ceramic Catalytic Converter Substrate Catalyst For Vehicle Emission Control System

Product Description

1. Introuduction

       The honeycomb ceramic carrier is mainly made of cordierite, and the honeycomb ceramic material used for automobile exhaust treatment is often porous cordierite, which is mainly used to provide inert physical structure for carrying catalyst coating. In order to have a larger catalytic surface in a smaller volume, the surface of the support is made into a honeycomb shape. The advantages are large specific surface area, low thermal expansion coefficient, excellent thermal shock resistance, strong acid, alkali and corrosion resistance, and high mechanical strength. Honeycomb ceramics as a carrier is the key component of three-way catalyst. One of its important materials is cordierite, which is resistant to high temperature, with high continuous working temperature up to 1200℃, high strength and low linear expansion coefficient. The carrier adopts effective surface and proper pore structure. The opening rate of ceramic carrier can reach 400-600 mesh /inch2, and the small wall thickness can reach about 0.16 mm. It can enhance the mechanical strength of the catalyst, improve its wear resistance, impact resistance, gravity resistance, compression resistance, high temperature resistance and phase change resistance, improve the conductivity of the catalyst, and reduce the content of active components, especially when noble metal catalysts platinum, palladium and rhodium are used, the active components can be highly dispersed and the consumption can be reduced. In a word, the quality of the carrier is extremely important to the catalyst. The mesh number of the honeycomb ceramic carrier can be 200 mesh, 300 mesh, 400 mesh or 600 mesh, and the cross-sectional shapes are round, racetrack, oval and some special shapes according to customer requirements, so as to meet the requirements of different vehicle types.

2,product features:

1. thin hole wall, large specific surface area, small resistance, low bulk density and high compressive strength

2. Low coefficient of thermal expansion

3. Good thermal shock resistance and thermal shock resistance

4. It has good matching with various catalyst active components

5. Good cold start performance, low light-off temperature, fast temperature rise, small air resistance and high conversion efficiency

6. The core structures such as spiral, double S and triple core can be produced according to the requirements of users

7. It can be designed into cylindrical, racetrack and other special-shaped structures according to the requirements of different motor vehicles

8. The products meet the manufacturing and supporting requirements of various sizes and models of motor vehicles, and meet the Euro III and stricter emission standards

3. Specification

Remark: The size is not complete, it is only routine.

Product display

Company Information

Founded in Shanghai in 2019, Shanghai Jisi Environmental Protection Technology Co., Ltd. is a technology, sales and service company focusing on the environmental protection of industrial exhaust gas; In the same period, a brand new catalyst brand "Hive Tech" was created for the industrial exhaust catalyst market, aiming to provide high-quality catalysts for the market.

The establishment of "Haifu" hopes to make domestic brands occupy a place in this market through continuous R&D investment and its advanced production equipment. Our fully automated production line brings fast response and delivery as well as high quality and stability. Localized production brings high cost performance products, thus breaking the monopoly and leading position of imported catalysts.

The company's main products are precious metal/base metal catalysts for VOC emission reduction, SCR catalysts. In addition to general-purpose catalysts, the company also launched efficient alkane catalysts, S-resistant catalysts and halogen resistant catalysts for various market segments.

In addition, the shareholders and relevant beneficiaries of the Company also act as agents for other environmental protection related products, such as pumps/valves/control components, to obtain the best price through long-term cooperation with suppliers of this type for foreign trade business.

Packaging & Shipping

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons Or wooden cases and foam. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A:  FOB, CIF, DDP.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.