600cpsi VOC Removal Catalyst Rto Noble Metal Co-Catalyst

Chinese Factory VOC Catalyst To Purify VOCs Pollutants For RTO Equipment

Product Description

1. Introuduction

Regenerative waste gas treatment furnace (RTO)

• Required temperature: 800-900 degrees Celsius
• Toluene concentration below 500ppm can also start the design of spontaneous combustion system
• It can be used together with RCO

It is suitable for large air volume and low concentration, and the concentration of organic waste gas is between 100 ppm and 20000 ppm. Its operation cost is low, and when the concentration of organic waste gas is above 450PPM, RTO device does not need to add auxiliary fuel; The purification rate is high, the two-bed RTO purification rate can reach more than 98%, and the three-bed RTO purification rate can reach more than 99%, and no secondary pollution such as NOX is produced; Fully automatic control and simple operation; And high safety.

Advantages: The operating cost is very low when treating organic waste gas with large flow and low concentration.

Disadvantages: high one-time investment, high combustion temperature, unsuitable for treating high-concentration organic waste gas, many moving parts and more maintenance work.

RTO concentration and waste heat recovery system can concentrate VOCs waste gas with low concentration and large air volume into waste gas with high concentration and small air volume, and then burn at high temperature, and recover the heat of heat storage body again, which can be used in waste gas preheating and heat conversion equipment.

When using VOC catalysts, it is necessary to pay attention to the following safety instructions and precautions:
1. Catalysts should be stored in a dry, ventilated, and dark place, avoiding direct sunlight and humid environments;
2. During operation, protective gloves and glasses should be worn to avoid catalyst contact with skin and eyes;
3. Catalysts should avoid contact with harmful substances such as strong acids, bases, and oxidants to avoid accidental reactions;
4. During the use of catalysts, attention should be paid to controlling the catalytic temperature and gas flow rate to avoid excessive catalytic temperature and gas flow rate causing catalyst deactivation or dangerous side reactions;
5. Catalysts should be regularly inspected and maintained, and if damaged or ineffective, they should be replaced in a timely manner;
6. The catalyst should be properly disposed of after use to avoid environmental pollution or safety hazards;
7. Before using VOC catalysts, carefully read the product manual and safety instructions, and follow relevant operating procedures and safety measures.

Company Information

Founded in Shanghai in 2019, Shanghai Jisi Environmental Protection Technology Co., Ltd. is a technology, sales and service company focusing on the environmental protection of industrial exhaust gas; In the same period, a brand new catalyst brand "Hive Tech" was created for the industrial exhaust catalyst market, aiming to provide high-quality catalysts for the market.

The establishment of "Haifu" hopes to make domestic brands occupy a place in this market through continuous R&D investment and its advanced production equipment. Our fully automated production line brings fast response and delivery as well as high quality and stability. Localized production brings high cost performance products, thus breaking the monopoly and leading position of imported catalysts.

The company's main products are precious metal/base metal catalysts for VOC emission reduction, SCR catalysts. In addition to general-purpose catalysts, the company also launched efficient alkane catalysts, S-resistant catalysts and halogen resistant catalysts for various market segments.

In addition, the shareholders and relevant beneficiaries of the Company also act as agents for other environmental protection related products, such as pumps/valves/control components, to obtain the best price through long-term cooperation with suppliers of this type for foreign trade business.